Nexo P12 Speaker

You are here

  

Nexo P12 Speaker

Nexo P12 Speaker: Single Unit
 
 
Housed in a curvilinear enclosure of custom birch and poplar plywood, the P12 employs a purpose-designed 12″ LF Neodymium driver and 3″ diaphragm HF driver in a coaxial configuration.  The compact cabinet measures just 531mm x 432mm x 317mm, and can be deployed in vertical or horizontal (wedge monitor) configurations, with HF directivity set to match the specific application. The backplate holds two Speakon® connectors (plus one each on both sides) and a recessed switch to change the cabinet from 2-way passive to 2-way active mode.
 
KEY FEATURES
  • Compact, low-profile, curvilinear enclosure
  • 12” LF Neodymium driver and 3” diaphragm HF driver in a coaxial configuration
  • Variable HF directivity
  • Switchable Active/Passive modes
  • 140dB peak SPL (Active Mode)
  • Threaded inserts on the back and on both sides for connection of mounting accessories
  • Stand fitting on both sides
  • 4x NL4, 4 poles connectors; 2 on the back and 1 on both sides
SPECIFICATIONS
  • Frequency Response (+6 dB) 60 Hz - 20 kHz
  • Peak SPL Level (1m) 138dB Peak (Passive mode) / 140dB Peak (Active mode)
  • Operating Voltage 55Vrms (150Vpeak)
  • HF Dispersion (according to horns) 60°x60° - 90°x40° - Asymmetrical Dispersion 60° to 100°x40°
  • Crossover Frequency 60 Hz - 85 Hz
  • Nominal Impedance Active mode (8Ω LF, 8Ω HF), Passive mode: 8Ω
FEATURES
  • Components LF: 1x12" - 8Ω; HF : 1x3" - 8Ω - Neodymium driver
  • Material Baltic birch / Poplar plywood
  • Finish Black or white structural paint
  • Front Finish Steel front grille + Black mesh
  • Fittings Handle on both sides. Threaded inserts on the back and on both sides for connection of mounting accessories. Stand fitting on both sides (35mm / 1"3/8).
  • Connector 4x NL4, 4 poles connectors; 2 on the back and 1 on both sides
  • Weight 20 kg / 44 lb
  • Height x Width x Depth 531mm x 432mm x 317mm (20.9" x 17" x 12.4
Day rate : £30.00 Week rate : £90.00